Solved: Xhorse Condor XC-Mini Plus Cut HU66 Inaccurately?

Problem: The Xhorse Condor XC-Mini Plus cannot accurately cut the HU66 key. I tried three keys, but all were wrong. 


What's the matter? Please help.

xhorse-condor-xc-mini-plus-cut-hu66-inaccurately-1

xhorse-condor-xc-mini-plus-cut-hu66-inaccurately-2

xhorse-condor-xc-mini-plus-cut-hu66-inaccurately-3

Troubleshooting 

From the image provided, the engineer suggested:

1. Please make sure the drill diameter is correct. Check if the cutter is 2.5mm;

2. Check if the key option is correct, as the key blade doesn't look like HU66.

xhorse-condor-xc-mini-plus-cut-hu66-inaccurately-4

Solution

The customer wants to cut a Citroën Berlingo key, but it turns out to be a VA2 Blade rather than HU66, so he can't cut it correctly.


Re-manually select the right option from the Vehicle Database on Xhorse Condor.

Then the problem can be solved.

xhorse-condor-xc-mini-plus-cut-hu66-inaccurately-5

xhorse-condor-xc-mini-plus-cut-hu66-inaccurately-6

xhorse-condor-xc-mini-plus-cut-hu66-inaccurately-7

Technical Support

E-mail: Sales01@Xhorse.co.uk

Skype: service@xhorse.co.uk

Whatsapp: +86 17308368390


www.xhorse.co.uk


Comments

Post a Comment

Popular posts from this blog

Xhorse HU162T 8-Cut/9-Cut/10-Cut Add Key & AKL Tutorial

Image
Today we'll show the procedure before using the Xhorse Key Cutting Machine to complete the add key and all key lost for HU162T 8-cut, 9-cut, and 10-cut keys. The tutorial applies to machines such as Dolphin II , Condor XC-MINI Plus II , etc. How to distinguish the HU162T 8-cut, 9-cut & 10-cut key? As shown in the picture, the 8-cut has only 1 fixed cut on the side and is straight. The effective surface is on the top. The 9-cut has 3 side cuts, and the effective surface is on the top. The 10-cut has 4 side cuts, and the effective surface is on the bottom. The operation process is demonstrated as follows.  HU162T 8-Cut Add Key Enter Xhorse App: Cut by Bitting >> HU162T >> Silca - HU162T >> 8-1 Bitting Read the prompts on the screen, and put the original key on the clamp according to the prompts. Click "Decode key". We can select the A-axis or B-axis options in the upper left corner. Switch to the B-axis key bitting page, the cut of the B-axis is fixe...
Read more

Solution: Xhorse Condor XC-MINI Plus 2 Movement Abnormal

Image
Xhorse Condor XC-MINI Plus 2 is making strange noises and abnormal movements? Learn how to diagnose and fix XYZ axis motor issues. Test sensors, replace faulty Y/Z-axis parts, and know when to call support. Quick solutions for smooth operation. Condor II Fault Phenomenon: Abnormal noise during XYZ axis self-check or movement after power-on. Noise occurs during key decoding/cutting when a specific axis moves. Solution Steps: Perform Device Self-Test: Navigate to: Motor Measurement → Test XYZ axes separately. Normal Result: "OK" displayed (no action needed). Fault Detected: "Bad" appears for the faulty axis (e.g., Y-axis in the example). Sensor Replacement: Y/Z-Axis Fault: Replace the faulty sensor (refer to the images for the locations of the old and new sensors). Image 1: Z/Y-axis sensor positions. Image 2/3:* Old vs. new sensor appearance. X-Axis Fault: Contact technical support (replacement is complex). Key Notes: DIY replacement recommended only for Y/Z-axis se...
Read more