Xhorse Condor XC-MINI Plus II

Show how to cut Mul-T-Lock dimple key household key with Xhorse CONDOR XC-MINI PLUS II step by step. Prepare:  The original key  Lock cylinder 1.0mm Probe Dimple Cutter (internal) Dimple Cutter (external) M5 Clamp Steps: Step 1. Height Calibration Stick in the probe and the dimple cutter (internal) Make sure the clamp is tightened. Tap "Settings", then "Device Calibration", then "Height Calibration".  Step 2: Key Learning Tap "Household key" and select the key brand "Mul-T-Lock", then "Mul-T-Lock (8.8mm-R)", then " Mul-T-Lock 4-4". Insert the original key into the M5 clamp. Tap "Decode key" to start key learning till 100% ok.  Condor XC-Mini Plus II APP shows "Household key learning completed".  Step 3: Key Cutting Insert the blank key into the M5 clamp and close the cover. Tap "Start Cutting" then "OK". Flip the key.  100% ok Clean the shavings and remove the key.  Tighten th...

Do you want to engrave an "X" (Xhorse logo) on a blank key? Xhorse Condor XC-MINI Plus II can do it in 3 steps.  Step 1. Insert the engraving cutter and the key blank.  Step 2. Send the picture you want to engrave to the machine.  Pair the machine with your smartphone via Bluetooth.  Make sure the picture is in PNG format with transparent background.  Send the picture.  Step 3. Choose the picture and start to engrave.  Adjust the image to the appropriate position. The first dot engraved will start from the highest point on the left of the image.  Alright, engraving completed.  Watch video on how to engrave "X" on a key blank with Xhorse Condor XC-MINI Plus II :