Xhorse Condor XC Mini Plus II Update: Easier And Faster

When you receive your key cutting machine, how will you update it?


Using a personal computer,

download an upgrade kit,

install the kit,

connect the PC to the machine with a USB cable,

and finally, you can update the device.

condor-xc-mini-plus-update

These tedious processes are not required in the new condor xc mini plus ii. It allows users to directly update the system, APP, firmware, and database on the machine.


All you need to do is connect to a WiFi network.

condor-xc-mini-plus-ii-update-01

condor-xc-mini-plus-ii-update-02


Enter the update screen.
condor-xc-mini-plus-ii-update-03


Press “update” and wait a few moments of time.
condor-xc-mini-plus-ii-update-04

condor-xc-mini-plus-ii-update-05


Finished!
condor-xc-mini-plus-ii-update-06


it is much simpler and more intuitive for anyone who uses the condor xc mini plus 2.

You can also click the video to see a clearer operation:

Comments

Post a Comment

Popular posts from this blog

Xhorse HU162T 8-Cut/9-Cut/10-Cut Add Key & AKL Tutorial

Image
Today we'll show the procedure before using the Xhorse Key Cutting Machine to complete the add key and all key lost for HU162T 8-cut, 9-cut, and 10-cut keys. The tutorial applies to machines such as Dolphin II , Condor XC-MINI Plus II , etc. How to distinguish the HU162T 8-cut, 9-cut & 10-cut key? As shown in the picture, the 8-cut has only 1 fixed cut on the side and is straight. The effective surface is on the top. The 9-cut has 3 side cuts, and the effective surface is on the top. The 10-cut has 4 side cuts, and the effective surface is on the bottom. The operation process is demonstrated as follows.  HU162T 8-Cut Add Key Enter Xhorse App: Cut by Bitting >> HU162T >> Silca - HU162T >> 8-1 Bitting Read the prompts on the screen, and put the original key on the clamp according to the prompts. Click "Decode key". We can select the A-axis or B-axis options in the upper left corner. Switch to the B-axis key bitting page, the cut of the B-axis is fixe...
Read more

Solution: Xhorse Condor XC-MINI Plus 2 Movement Abnormal

Image
Xhorse Condor XC-MINI Plus 2 is making strange noises and abnormal movements? Learn how to diagnose and fix XYZ axis motor issues. Test sensors, replace faulty Y/Z-axis parts, and know when to call support. Quick solutions for smooth operation. Condor II Fault Phenomenon: Abnormal noise during XYZ axis self-check or movement after power-on. Noise occurs during key decoding/cutting when a specific axis moves. Solution Steps: Perform Device Self-Test: Navigate to: Motor Measurement → Test XYZ axes separately. Normal Result: "OK" displayed (no action needed). Fault Detected: "Bad" appears for the faulty axis (e.g., Y-axis in the example). Sensor Replacement: Y/Z-Axis Fault: Replace the faulty sensor (refer to the images for the locations of the old and new sensors). Image 1: Z/Y-axis sensor positions. Image 2/3:* Old vs. new sensor appearance. X-Axis Fault: Contact technical support (replacement is complex). Key Notes: DIY replacement recommended only for Y/Z-axis se...
Read more