Xhorse Condor XC-MINI Plus II Duplicate RB Locks Dimple Key

How to use Xhorse Condor XC-MINI Plus II to cut a household key RB locks dimple key? In the process, you’ll also need an original household key for duplication. Follow the procedure below to learn how to do.


Full operation video


1. Cutting Setting

Settings >> Cutting setting >> Probe and cutter diameter setting >> Select “1.0mm” & “Dimple cutter(both)”, then save.


Insert the probe and the cutter.

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-1

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-2


2. Key Learning

Household >> RB locks >> Dimple key with sided internal dimple >> Dimple(Internal)(Front)

Fix the original key on M5 clamp.

Click “Decode key”.


XC-Mini Plus 2 will starts decoding automatically...

Just wait until internal side learning completed.


Dimple(External)(Front) >> Decode key

XC MINI Plus II will start again...

Household key learning completed.

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-3

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-4

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-5

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-6


3. Key Cutting

Select “Dimple(Internal)(Front)”, replace a blank key fixing on M5 clamp.

Start cutting >> OK

Put down the cover and wait for cutting...

Once done, flip the key to repeat cutting for the other side.


Select “Dimple(External)(Front)” to start cutting again.

Remember to cut the other side as before.


Condor XC-MINI Plus II is able to finish the cutting process automatically.

Key cutting completed.


Take out the key to compare with the original one.

They are same, and it does work.

Done!

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-7

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-8

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-9

xhorse-condor-xc-mini-plus-ii-duplicate-rb-locks-dimple-key-10

www.xhorse.co.uk

Comments

Post a Comment

Popular posts from this blog

Xhorse HU162T 8-Cut/9-Cut/10-Cut Add Key & AKL Tutorial

Image
Today we'll show the procedure before using the Xhorse Key Cutting Machine to complete the add key and all key lost for HU162T 8-cut, 9-cut, and 10-cut keys. The tutorial applies to machines such as Dolphin II , Condor XC-MINI Plus II , etc. How to distinguish the HU162T 8-cut, 9-cut & 10-cut key? As shown in the picture, the 8-cut has only 1 fixed cut on the side and is straight. The effective surface is on the top. The 9-cut has 3 side cuts, and the effective surface is on the top. The 10-cut has 4 side cuts, and the effective surface is on the bottom. The operation process is demonstrated as follows.  HU162T 8-Cut Add Key Enter Xhorse App: Cut by Bitting >> HU162T >> Silca - HU162T >> 8-1 Bitting Read the prompts on the screen, and put the original key on the clamp according to the prompts. Click "Decode key". We can select the A-axis or B-axis options in the upper left corner. Switch to the B-axis key bitting page, the cut of the B-axis is fixe...
Read more

Solution: Xhorse Condor XC-MINI Plus 2 Movement Abnormal

Image
Xhorse Condor XC-MINI Plus 2 is making strange noises and abnormal movements? Learn how to diagnose and fix XYZ axis motor issues. Test sensors, replace faulty Y/Z-axis parts, and know when to call support. Quick solutions for smooth operation. Condor II Fault Phenomenon: Abnormal noise during XYZ axis self-check or movement after power-on. Noise occurs during key decoding/cutting when a specific axis moves. Solution Steps: Perform Device Self-Test: Navigate to: Motor Measurement → Test XYZ axes separately. Normal Result: "OK" displayed (no action needed). Fault Detected: "Bad" appears for the faulty axis (e.g., Y-axis in the example). Sensor Replacement: Y/Z-Axis Fault: Replace the faulty sensor (refer to the images for the locations of the old and new sensors). Image 1: Z/Y-axis sensor positions. Image 2/3:* Old vs. new sensor appearance. X-Axis Fault: Contact technical support (replacement is complex). Key Notes: DIY replacement recommended only for Y/Z-axis se...
Read more